Product description
Roller leveling is essentially a bending process. The out of the flat part, sheet, or plate is deformed by a series of alternating bends. These alternating bends are created by passing sheets between upper and lower sets of leveling rollers.
Series | Width of Material(mm) | Thickness of Material (mm) | Back-up Roller | Leveling Speed |
LTS-100 | 5 ~ 100 | 0.1 ~ 0.8 | Provided | 0 ~ 30 m/min |
LTS-150 | 5 ~ 150 | 0.1 ~ 0.8 | Provided | 0 ~ 30 m/min |
Series | Width of Material (mm) | Material thickness | Speed | Work Rollers |
LTS – 200A | 200 | 0.5 – 3.2 | 16 | 7 |
LTS – 300A | 300 | 0.5 – 3.2 | 16 | 7 |
LTS – 400A | 400 | 0.5 – 3.2 | 16 | 7 |
LTS – 500A | 500 | 0.5 – 3.2 | 16 | 7 |
LTS – 600A | 600 | 0.5 – 3.2 | 16 | 7 |
LTS – 700A | 700 | 0.5 – 3.2 | 16 | 7 |
Series | Width of Material (mm) | Thickness of Material | Back up roller | Work roller |
LTS – 150F | 150 | 0.2 ~ 1.5 | Upper 8 / Lower 9 | |
LTS – 200F | 200 | 0.2 ~ 1.5 | Upper 8 / Lower 9 | |
LTS – 300F | 300 | 0.2 ~ 1.5 | Upper 8 / Lower 9 | |
LTS – 400F | 400 | 0.2 ~ 1.5 | Provided | Upper 8 / Lower 9 |
LTS – 500F | 500 | 0.2 ~ 1.5 | Provided | Upper 8 / Lower 9 |
LTS – 600F | 600 | 0.2 ~ 1.5 | Provided | Upper 8 / Lower 9 |
Series | Width of Material (mm) | Thickness of Material | Back up roller | Work roller |
LTS – 200F | 200 | 0.1 ~ 1.2 | Upper 8 / Lower 9 | |
LTS – 300F | 300 | 0.1 ~ 1.2 | Provided | Upper 8 / Lower 9 |
LTS – 400F | 400 | 0.1 ~ 1.2 | Provided | Upper 8 / Lower 9 |
LTS – 500F | 500 | 0.1 ~ 1.2 | Provided | Upper 8 / Lower 9 |
LTS – 600F | 600 | 0.1 ~ 1.2 | Provided | Upper 8 / Lower 9 |
