Flange Roll Forming Machine
TDC Flange Roll forming machine
The TDC flange roll forming machine consists decoiler, then it enters through feeding into the roll forming line. after that, the flange is cut into the desired number of pieces and of the required length by cutting systems, precisely according to the parameters entered.
These roll forming machines produce the Flange to the end of the Duct Joint, meaning that the Duct Wall and the Flange are one piece. TDC / TDF Duct use in Ductmate Flange for the connection on duct systems.
TDF flange forming machine
The air duct is a piping system used for air transportation and distribution. The thin sheet flanged duct can divide into TDC duct and TDF duct according to the different flange cross-sectional shapes. The thin sheet conjoint flange duct, commonly known as TDC/TDF duct.
if you have this kind of TDC / TDC flange or even sometimes we can combine two different profiles into one roll forming machine. we make two in one machine just to take your profiles and we will give you a one-stop solution by LOTOS for roll forming machine.
What is a duct system?
Technical data about TDC Flange Machine
- Decoiler
| Decoiler type | Manual |
| Loading capacity | 5Ton (Impassive to expanding) |
| Steel coil I.D. | φ480-φ520mm |
| Steel coil O.D | max φ1800mm |
- Roll forming system with a feed panel unit
| Axis Diameter | Φ75mm |
| Forming Roller station | 24 vertical stations + 8 horizontal stations |
| Main Axis material | First grade 45# steel heated and quenched |
| Roller material | First grade 45# steel, Hard Chrome Coated, heated and quenched |
| Forming Speed | 10-12 m/min |
| Motor | 18 KW |
| Drive Type | Gearbox |
| Roller supporter | nodular iron casting pillar |
| Machine Frame stand | Welded by 400BH H-beam, Stress-Relieving |
- Electrical system
| PLC system | DELTA / MITSUBISHI |
| Length Controller | Encoder KOYO |
| Operation | Touch Screen DELTA/SIEMENS |
| Inverter | PANASONIC/YASKAWA |
| Voltage | 380V/50Hz/3P |
