The poultry feeding systems machine combines Coil sheet, Leveling, punching machine, into roll Forming Machine, cold roll forming, PLC-controlled hydraulic automatic cut off, output, and finished products. Poultry Feeding Trough Roll Forming Line is used for feeding cage sections.
Poultry Feeding Roll Forming Line
Poultry Feeding pipe Roll Forming Machine
poultry feeding systems machine
Multipurpose automatic feeder, suitable for different types of free-range poultry such as chickens, laying hens, turkeys, guinea fowl, cockerels, and ducks.
This system delivers feed automatically through a motor under the control of a feed sensor, which ensures birds feeding during the whole growing period. Eliminate hungry hyperirritability and ensure uniform growth of the birds.
Poultry feed tube making machine
Machine design capacity:
- Raw material thickness: 2mm
- Raw material yield limit: Q235 steel
- the working speed with punching: 15m/min
- Working area: about L25,000*W2000*H2000mm
Machine components:
This production line will be combined with hydraulic decoiler, levelling unit, punching unit , roll forming machine part, run-out table, expansion station, hydraulic oil pump station, and electrical control cabinet and so on.
Each part technical parameter:
| 1. Hydraulic decoiler | ||
| 1.1 | Loading capacity | 3T |
| 1.2 | Steel coil I.D. | φ480-φ508mm |
| 1.3 | Steel coil O.D. | φ1600mm |
| 1.4 | Cantilever width | 400mm |
| 2. Punching Station | ||
| 2.1 | Leveling Unit | 7-roller |
| 2.2 | Servo motor | 2.2KW |
| 2.3 | Punch stations | 2 units of dies, one for H, one for notch |
| 2.4 | Punching way | Hydraulic punching |
| 2.5 | Hydraulic pump station | 7.5KW |
| 3. Roll Forming Machine | ||
| 3.1 | Roller groups | 19 stations |
| 3.2 | Roller material | Cr12 with heat treatment, HRC58-62° |
| 3.3 | Roller shaft dia. | Φ55mm |
| 3.4 | Shaft material | 40Cr with quenching and tempering |
| 3.5 | Motor | 15KW |
| 3.6 | Machine frame body | Welded structure |
| 3.7 | Transmission Way | New generation gear |