Box Board Roll Forming Machine

Metal Facade roll forming machine

Metal facade cladding is a modern building material used in the design facades of structures.
It is a screen wall cladding product prepared in accordance with the building design parameters on a steel or aluminum frames. Metal cassette cladding developed to be used on the facades of buildings. Clamping of the metal plates together with clamps can remove the water insulation problem that may occur in the future.

Tube punching machine

Storage shelves usually have three major parts including columns, beams, and shelves. tube or Pipe Punching Machine is specially used for processing Supermarket rack and shelves. Tube Punching Machine is suitable for the Frames, Supermarket Shelving, Department Stores, Pallet Rack Systems, and much more

Supermarket Shelf Panel Making Machine

• Summary box panel roll forming machine

1. Raw material thickness: 0.5-1 mm
2. Material: G350Mpa cold rolled or hot rolled steel, galvanized steel
3. Input material width: depends on the size
4. Production line working speed: 6-8m/min
5. Working area: about L15,000*W2,000mm

• Main parts

This Box Board roll forming machine or Supermarket Box Board Roll Forming Machine production line will be combined with a hydraulic decoiler,  servo feeding device and, hydraulic punch machine with dies and, roll forming machine part and, output table, hydraulic oil pump, and electrical control cabinet, and so on.

Technical data Supermarket Shelf Panel Roll Forming Machine

Shelf panel making machine is able of producing shelf panels up to customized measurements as required. Roll forming stands move through the linear guide to adjust the gap between rollers for producing different sizes of panels.

• Decoiler:

• Servo feeding system:

• Punching station:

• Roll forming system with feed panel:

• Electrical system:

Don’t forget subscribe to our youtube channel :